- Other Heat Insulation Materials[10]
- XPS Boards[5]
- Refractory[10]
- Contact Person : Ms. Lin Erica
- Company Name : GX Nanning Global Hiyad New Material Building Co., Ltd.
- Tel : 86-0771-3397407
- Fax : 86-0771-3397929
- Address : Guangxi,Nanning,Room 501, 5/F, No. 2 Building, No. 5, Binhe Road, Xixiangtang Dist.
- Country/Region : China
- Zip : 530043
Related Product Searches:Insulation Cystosepiment with Groove,High Quality,Insulation Foam board, Thermal Insulation Material
Detailed product description:
Foam groove board or cystosepiment with groove is the foam board with ordered groove and holes on the surface, which is our special patented product.
By adding the holes with groove, the result of paving is much better thanks to the holes and groove on the board.
At the same time, the stability is more excellent since the holes can make the cement distribute well, so can stand up the compression.
Special characteristics:
1. Without made with the cement, the transportation is much easier with lower Freight.
2. And the insulation effect is also good as other kind of insulation brick.
3. Though you need to pave the cement mortar after laying our groove board, but the construction is very simple.
Structure of Construction:
Ten advantages to buy Hiyad’s insulation bricks
1.Good Quality
Regulate the production and implement the ISO9002 quality certification system with PICC insurance companies under writing. Some small factories are based on small workshops; the staffs are not trained before working so that the quality is uneven and instability.
2. Lighter Weight
XPS extruded insulation brick is 4kg / block.
3. Lower water absorption
5-7%water absorption makes the effect of heat preservation and insulation more stable. It will not crack owe to such low water absorption while general other manufacturers’ are 15-20%
4. Longer life
Material could be used for 50 years without degradation.
Some manufacturers use recycled material which will be degraded in 3-5 years
5. Better environmental protection
100% new raw material, insure the raw material with better environmental protection
6.Save half Working time
It could be put on the waterproof material directly, just need pointing after that.
7.Easier mending just remove the break board and put new one
8. Better paving effect
More than 20 colors can be chosen with more than 10 pictures can be selected
9. High capacity 500—800SQM (capacity) per day
10.Better Innovation
Our company specially set up the insulation Material R&D center, with the universities, organization, and science and technology association, energy-saving insulation Co., establishes the cooperation relationship. For example Dow Chemical, Owens corning etc, 3% of the input as the R&D cost, total has 6 patents in GuangXi
Physical properties | |||
Physical properties | Test standard | Test results | Units |
Bulk density | GB/T5486-2008 | ≤1300≤1100 | Kg/m³ |
Bulk density | GB/T5486-2008 | 600-650 | Kg/m³ |
Compressive strength | GB/T5486-2008 | ≥0.65≥0.50 | Mpa |
Thermal conductivity | GB/T10294-2008 | 0.03-0.09 | W/m.k |
Coefficient ofthermal storage | GB/T5486-2008 | 0.887-0.84 | W/SQM.k |
Water absorption | JC/T746-2007 | ≤7.2≤30 | %/(V/V) |
Specification | GJN-2006 | 300*300*50 | MM |
Frost resistance | JC-T746-2007 | No cracking, spalling, loose phenomenon |
The comparation between Hiyad series’ insulation bricks and Traditional insulation layer
Hiyad series’ insulation bricks | Traditional cement mortar insulation layer |
Endurance of thermal conductivity coefficient is very low | thermal conductivity coefficient is not stable |
Excellent resist compression intensity and anti-seismic intensity | Bad resist compression intensity and anti-seismic intensity, crack easily |
Shorter working time and long life | High cost and short life |
ower cost, transportation and construction are much easier | Difficult construction |
Easy maintenance | High maintenance costs |
Construction process and Paving effect:
Our certificates:
Insulation Cystosepiment with Groove